The Micro-Line Drip Line With Drip Emitters Is Extruded Micro Tubing With Flow Labyrinth In-Line Emitters Molded Into The Inside Wall Of The Micro Tubing The Inline Drip Emitter Is Built With A Large Filter Along The Cross Section Of The Drip Emitter To Ensure That Moving Particles On The Bottom Of The Micro Tubing From Entering The Labyrinth Water Path, Ensuring Trouble Free Operation And Long Life This Tubing Has Emitters Spaced 6 Apart For Your Convenience Nominal Flow Rates: 52 Gph (2 Lh) At 15 Psi (1 Bar) Dripper Color Code: Blue Operating Pressure: 10-25 Psi (7-17 Bar) Dripline Color Code: Black Or Brown Materials: Dow Fingerprint Dfda-7510 Nt Linear Low-Density Polyethylene Resin Size: 14 (6 Mm) (170 Id X 250 Od) (4445 Mm Id X 635 Mm Od) Spacing: 6, 9 Or 12 (15 Cm, 23 Cm, Or 30 Cm) Minimum Bending Radius: 1 (3 M) Filter Requirement: Minimum Of 150 Mesh
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
