This O-Ring Is Made Of Black Buna-Nitrile (Buna-N) And Has A Durometer Of 90A. It Has A Round Cross-Section And Can Be Used Across A Wide Temperature Range (-30 Degrees F/-34 Degrees C To 250 Degrees F/121 Degrees C). Designed For Use In A Wide Variety Of Sealing Applications This Buna-Nitrile O-Ring Meet Standards Defined By Aerospace Standard As568A Which Is The Aerospace Size Standard For O-Rings.Buna-Nitrile Can Have High Tensile Strength And Has Abrasion Tear And Compression Set Resistance. It Is Compatible For Use With Petroleum Hexafluoroacetone (Hfa) Hexafluoro-2-Butyne (Hfb) And Hydrofluorocarbon (Hfc) Fluids Vegetable Oil Alcohol Acids And Aliphatic Hydrocarbons. Buna-Nitrile Is Vulnerable To Acetone Ethers Esters Ozone Sunlight And Weathering And Should Not Be Used In Ozone-Generating Electric Motors Welding Equipment Or In Applications With Exposure To Uv Light.The Durometer Hardness Of This Buna O-Ring Is 90A. Durometers Measure The Hardness Of A Material And Its Resistance To Permanent Indentation. A Higher Durometer Value Indicates Greater Resistance To Indentation. On A Scale Of 0 To 100 A Value Of 0 Indicates That A Sample Was Completely Penetrated While A Value Of 100 Shows No Indentation In The Sample. The Letter Following The Number Identifies The Shore Scale Which Is Either Shore A Or D. Shore A Is Used For Softer Plastics While Shore D Is Used For Harder Plastics.O-Rings Provide A Pressure And Fluid Seal Between Cylindrically Shaped Overlapping Mating Surfaces And Are Commonly Seen In Engines Faucets Flanges Valves And Various Cylinders. They Are Circular In Shape With A Round Cross Section And A Hole In The Center Similar To A Doughnut. O-Rings Are Available In Various As568A Dash Sizes Which Is The Standardized Sizing For O-Rings And Defines The Nominal Inside Diameter (Id) Outer Diameter (Od) And Cross-Sectional (Cs) Diameter Of An O-Ring.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
