Product Details: Name: Brown Marble Self-Adhesive Wallpaper Specifications: 16 Inches X 354 Inches (40Cm X 9M) Total: 38.8 Sq Ft Material: Vinyl, Paper, Plastic Pattern: Faux Marble Pattern Color: Dark Brown Thickness: About 0.25Mm Purpose: Decoration Wall, Floor, Furniture Set: 1 Roll Installation Steps: 1. Clean The Surface; 2. After Measuring The Required Amount, Cut The Vinyl Wallpaper Into The Corresponding Size. It Is Recommended To Leave A Margin Of 2-3Cm On Each Side For Later Adjustment; 3. Tear Off The Backing Paper Of The Wallpaper From One Of The Corners, Please Do Not Remove It All At Once; 4. When Peeling Off The Backing Paper, Use A Towel To Smooth The Wallpaper, The Order Is From Top To Bottom, From The Middle To The Edge; 5. After Pasting, If There Are Bubbles On The Surface Of The Wallpaper, You Can Use A Needle To Pierce A Small Hole On The Bubble To Remove The Gas. Note: 1.Self-Adhesive Wallpaper Cannot Be Applied To Uneven Surfaces, Water, Oil, And Dusty Surfaces. 2.Due To Different Production Batches, The Wallpaper Will Have Color Difference.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
