Model #4001-Xt
Fitment: \'98-14 Ford F150 | \'98-16 Ford Super Duty | \'99-13 Chevrolet Silverado | 99-13 Gmc Sierra | \'95-08 Dodge Ram Compatibility: If You Use A Tonneau Cover You May Prefer Our Flush Fit Models - Model #4025 & Model #4028
Installation: Installation Is Quick And Requires Nothing More Than A Phillips Head Screwdriver. Remove Any Pop-Out Plastic Rail Cap Covers On The Truck Bed. Remove The Two Phillips Head Screwdrivers From The Anchor. Hold Onto The Top Plastic Bull Ring Cover And Guide The Lower Steel Plate At An Angle Into The Hole From The Side Of The Bed. Once The Lower Plate Is Inside The Stake Pocket - Let The Plastic Cover Fall Into Place And Pull Up On The Steel Anchor Ring. This Will Catch The Lower Plate Onto The Trucks Sheet Metal. Hold The Steel Anchor Ring Up While You Re-Insert And Tighten Both Phillips Screws. Typical Install Time - Under A Minute.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
