How To Remove And Install A Weir Gate Assembly This Weir Model Has A Snap-On Tab Design. The Tabs Flex Inwards To Enable Them To Fit And Then Snap Into Their Designated Slots Within The Skimmer Unit. But First, Here Are Steps You Have To Follow To Install The Weir Flap/Gate Properly: 1.You Need To First Turn Off Both The Pools Filter And Pump. 2.If The Old Weir Gate Is Still In Place, Youll Need To Open The Skimmer Lid And Access The Old Weir Gate From There. 3.The Locking Pins Are At The Bottom Of The Weir Gate. Feel Around For The Tabs And Press Both Tabs Inwards Simultaneously. Once Free, Pull The Old Weir Gate Out From The Skimmer Lid. 4.Youll Need To Install The New Weir Gate From The Front/Poolside Of The Skimmer. First, Insert The Weir Into The Skimmer. To Make The Process Easier, Insert The Weir Gate Sideways And Insert One Pin First. Press The Tab Against Its Slot To Depress It, Making It Easier For You To Insert The Other Pin. 5.Once Both Pins Are In The Right Position, Let Go Of The Weir Gate To Release The Depressed Tab And Enable Both Pins To Snap In Place.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
