The Cim-Tek 70059 Dispenser Filter Removes Particulates Like Dirt Dust And Rust. For Use With Gasoline Diesel Biodiesel Up To B20 And Ulsd Fuels. The Maximum Flow Is 25 Gpm/94.6 Lpm. The Maximum Working Pressure Is 50 Psi/3.4 Bar. The Maximum Differential Pressure Is 25 Psi/1.7 Bar. The Hydrosorb 300 Series Spin-On Filters Have A Standard 3/4 In. Opening Required For Most Service Station Pumps And Dispensers. The 300Hs-1 0 Type 2 A Nominal 1 0 Micron Is Recommended For Gasoline And Diesel Fuels. The 300Hs-30 Type 2 A Nominal 30 Micron May Be Preferred For Heavier Distillates Such As Diesel Fuel And Fuel Oils. The Water-Holding Capacity For The 300Hs-10 Type2 And The 300Hs-30 Type 2 Is 130 Milliliters Or 4.5 Ounces Before Flow Restriction Occurs. The 300 Hydrosorb Spin-On Filters Are Recognized By Underwriters Laboratories For Use On Service Station Pumps And Dispensers. The 300 Hydrosorb Spin-On Filters Are Available With A Selection Of Aluminum And Cast-Iron Filter Adapters For Standard Applications.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
