If Your Jeeep Has A Lot Of Rust Or Rot This Will Cover It Up And Look Great Doing It. Plus With The 1 1/2 Inch Bend On It, It Adds A Stronger Tougher Better Looking Item. Covers Run Full Length Front To Back. Please Note: To Install, Remove Hood Latch And Rubber Stops, Line Up The Fender Top Where You Want It For Best Fit And Look, Now Mark Hood Latch Holes & Rubber Stops From Underside With Marker And Remove. Then Drill The Holes You Marked With A 1/4 Inch Drill Bit For The Hood Latch Bolts, Then Reinstall The Hood Latch. You Can Do The Same For The Rubber Stops If You Want To Install Them. Please Note: To Install You Can Use Rtv Caulk, 2 Sided Tape, Screws, Or Rivets.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
