The Base Unit Of The Cable Tester Can Be Connected Via A Network Cable Directly To A Hub Or Switch To Test Wire Connections, Or To A Network Card To Test The Send Receive Pairs Of Wires, It Can Test If There Is Any Open Or Miss-Wire Without The Remote Kit. 9 Led'S To Show You Exactly Which Wire Is Open Or Miss-Wire On Both Remote And Master Unit. Old Version Has 4 Led'S. Master And Remote Unit Are Both Included. Automatic Scan Mode, Rapidly Testing. Power Switch Is Not A Push Button Will Not Easily Turn On And Waste Battery." "Test The Correct Pin Configuration Of 10/100 Base-T 10Basc-2 Thin Ethernet Cable Easy To Verify Cable Continuity, Open, Short And Miss-Wire With Remote Kit, It Can Remotely Test Cable Up To 1000 Ft In Length Either On Wall Plate Or Patch Panel. Can Test The Grounding. Auto Scan With 2 Speeds For Pin-Out Indicators. A Power Switch Is Provided For Saving Battery Power. 9 Volt Battery.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
