Specification: Material: Food Grade Stainless Steel 304 Capacity: 98Ml Each Mold Feature: Convenient Efficient Fast Product Size: 13.7""X6.1""X5.1"" (35X15.5X13Cm) Color: As The Picture Shows Treatment Process: Press Robot Seamless Welding Use Range: Frozen Food Equipment Description: 100% New Quality Food Grade 304 Stainless Steel. Stainless Steel Ice Cream Mould Can Be Used To Make Ice Cream Pudding Etc Can Be Made 20Psc Popsicles At A Time. There Are Multiple Choices For You. You Can Choose Different Molds In Our Store. Product Use: According To The Formula Regulate The Completion Of The Raw Material After Pour Sa Die Inside Don'T Fill 2 ~ 3 Mm Lower Than The Standard Height Finally Put The Popsicle Stick On A Stick Slot In The Lid Cover Up And Cover. You Can Then Put The Mold Into The Frozen Machine And Produce The Popsicle. Because It Is 304 Stainless Steel The Heat Conduction Fast! Please Note: 1.It Can'T Fill Too Full When It Is Put Into It. It Will Spill Over To Stick To It. It Is Inconvenient To Get It Out. 2.Take The Time To Be Patient And Wait Three Minutes At Room Temperature When The Ice Cream Is Solid. 3.When You Need To Flush The Water Turn The Machine Around And Flush It. If You Still Can'T Get It Out Keep Flushing.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
