Throttle Control Cables Act Like A Relay Between Your Unloader/Pilot Valve And The Throttle Arm On Your Engine. Your Unloader/Pilot Valve Will Have A Preset On/Off Pressure. When The Air Tank Drops Below The Lower Pressure Setting Of The Pilot Unloader Valve The Pilot Valve Will Relay Through The Throttle Control To Your Engine That Its Time To Cycle On. Once Tank Pressure Reaches The Higher Psi Rating On Your Pilot Unloader Valve The Pilot Valve Will Relay Through The Throttle Control To Your Engine That Its Time To Cut Off. Throttle Control Cables Are Just A Means For The Pilot Unloader Valve To Communicate To The Engine When Its Time To Cycle On Or Idle Off. >>> Conrader Cable Style Throttle Controls Are Mounted On The Pilot Valve Or Elsewhere On The Compressor And The Cable End Is Connected To The Engine Throttle Arm. These Are Of Brass Construction With Viton Seals Stainless Steel Springs And Stainless Steel Cable. The Cable Is Permanently Lubricated And Is Self Cleaning. Routing Clamps Are Used To Mount And Protect The Cable.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
