With The Candelabra Socket E-12 You Can Adjust Overall Height From 3-4/5 To 5-1/5 Inches By Using The Set Screws On The Bracket. Brass And Silver Wire Screws Make It Easy To Properly Add A Cord To The Socket. Installation: They Are Easy To Install. Just Disconnect The Wires From The Old Socket And Unscrew It Then Thread The Wires Through The Threaded Hole In The Base Of The New Socket An Screw It Into The Lamp.Reattach The Wires Finally.(As You Connect It Into Power Ac110V You Don'T Need To Differentiate The Silver And Brass Screw.) The Socket Are Adjustable It Is Adaptable The Threaded Stems On Chandelier Which Are Varying In Height Or Accommodate A Variety Of Light Fixtures. Electric Rating: 125V / 75W Fitted With Threaded Bracket 1/8Ip To Fit 3/8"" Lamp Pipe Height:3-4/5 Inch ~ 5-1/5 Inch Length Of The Cover Sleeves:4 Inches Outside Diameter Of The Cover Sleeves: 7/8""(2.2Cm) Internal Diameter @13/16""(2.06Cm)
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
