Measurements: The Post (Or Part That Inserts Into Your Grate) Measures .178 - .180" (About 3/16") In Diameter. Depth Is .255" (A Little Bigger Than 1/4" Inch). Please See The Size Clearly!!
Installation Stepss(A Little Glue Or Heated Silicone Oil Must Be Squeezed Into The New Furnace Feet Or Grate Holes)
1. Turn Your Grate Over And Take Out The Old Bosch/Thermador Rubber Feet
2. Clean The Hole Use The Flat Base Coat Dry Regular Clean As Much As Possible
3. Squeeze A Little Bit Glue Or Heated Grade Silicone On Your New Feet Or In Your Grate Hole
4. Place Rubber Foot In The Bosch/Thermador Grate Hole And Press It
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
