For 1\" Handlebars Only. Risers Measure 1\" From Their Base To The Centerline Of The Handlebar And 2.25\" Overall.
Fitment:&Nbsp;
- For Modern Japanese Cruisers Have 25Mm (1 Inch) Handlebars, Like:
- 883L / 883R / 883N All Years
- Flstf / Fxdf / Fxdls / Fxdwg 2006 &Amp; Older
- Heritage Softail All Years
- Vtx 1300 All Years
- 900 All Years
- C50 / C90 All Years
- Bonneville T120 All Years
- Thruxton 2014 - Older
- V92C All Years
- Bolt All Years
- V-Star 650 / 950 / 1100 All Years
Dimension:
- Hole Diameter: 25Mm / 1Inch
- Height: 72Mm / 2.8 Inch
- Height From Bottom To Center Of Hole: 50Mm / 2 Inch
- Top Area: 50Mm X 30Mm / 2 X 1.2 Inch
- Diameter Of The Mounting Bolts Hole: 12Mm / 0.5 Inch
- Bottom Width: 28Mcm / 1.1 Inch
If There Is Any Problem With The Fitment, Just Feel Free To Reach Out To Us For A Solution.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
