How To Turn On / Off Light And Motion Sensor Function? Please Install 3D-Cell Batteries As Well As Push Out The Transparent Sheet Of Remote .Then Turn On / Off By Remote . Motion Detect Works Only On Full Darknees . If You Want To Use Motion Sensor Function, Please Press ""M/On"" To Turn On Motion Sensor , Press ""M/Off"" To Turn Off. The Red Indicator Light Will Flash If You Turn On. It Will Turn On Automatically ,In Full Darkness And Auto Off After 20 Seconds If No Motion Detected. The Detector Distance Is 18 Feet =216.53 Inches .Kindly Note: Please Firstly Push Out The Transparent Sheet Of Remote .Our Rf Remote Powered Button Battery (Cr2025) . If The Light Doesn'T Turn On/Off ,Please Check The Battery Of Light And Remote .Please Feel Free To Contact Us If You Have Any Problem ! We Will Try Our Best To Provide Good Product And Good Service ! &Nbsp; Diffused Lens Motion Sensor Light Sensor Powered By:D-Cell Batteries (Not Included) Run Time:1200Days(8 Times/Day,20Seconds/Time) Wattage: 2.0W Lumens:300Lm Voltage Of Light: Dc4.5V (3*D Battery) Lifespan:30000Hours Sensitivity: 5.5 Meter Distance Sensor Range: 120 Degrees Led Qty: 6*0.2W Warm White And 6*0.2W White Smd Leds Light Color: Cold White/Warm White Color Temperature: 3000K Warm White And 8000K Cool White Mounting: Tape Or Magnet &Nbsp; Package: 1*Rf Remote Control Ceiling Light1*Rf Remote
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
