Magnetic Door Switch Normally Closed When The Switch Is Close To The Magnet The Circuit Is Conductive(Light On); When The Switch Is Separated From The Magnet The Circuit Is Not Conductive(Light Off). Wide Applicaions Work With All Access Control And Burglar Alarm Systems. Can Be Installed In Wooden Or Aluminum Alloy Doors And Windows. Please Note A Magnetic Door Contact Can Only Provide A Switching Signal To The Device. It Cannot Directly Load The Power Supply And Cannot Be Directly Connected To The Lamp. Specifications: Model: Rc-33 Contact Type: Nc(Normally Closed) Max. Sensor Sensitivity: 10Mm5Mm Max. Current: 120Ma Max. Voltage: 100V Working Voltage: Dc0-24V Max. Contact Power: 10W Size(Approx.): 16.7 X 10.7Mm / 0.66 X 0.42Inch (H*D) Cable Length(Each): 30Cm / 11.8Inch Housing Material: Abs Wire Type: 1007#/24#300Mmul Package Content: 5 X Magnetic Door Switch
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
