The Makerbeam T-Slot Nut Is Made Of Stainless Steel And Was Specially Designed To Slide Into The T-Slot Grooves Of The Makerbeam Aluminum Profile (10Mmx10Mm In Diameter). The Makerbeam T-Slot Nut Is Not Compatible With Makerbeam Xl Or Openbeam Both 15X15Mm In Diameter. For These Profiles That Are 15Mmx15Mm In Diameter There Are Other T-Slot Nuts Available. The T-Slot Nut Is Great To Fasten Brackets Or Corner Cubes. For These Two Purposes The Nuts Come With Two Types Of Bolts. The First Type Is A Button Head Socket Screw (Iso7380 M3 4Mm A2) And Is Meant To Be Used With Brackets. The Second Is The Flat Head Countersunk Socket Screw (Din7991 M3 4Mm A2) And Is Meant To Be Used With Corner Cubes. Do Note That Because Of The 4Mm Thread The Load Bearing Capacity Of Structures Will Be Limited. And Be Careful With The Bolts That Come With The Corner Cubes. 4Mm Or 6Mm Is Hard To Tell Apart!
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
