The Lift Adapter Amt0046 Uses Three Screws That Fasten To The Flywheel To Lift The Engine. The User Must Select The Correct Screws To Fasten The Tool To The Flywheel. If The Short Screws Are Installed In The 90 V6 Flywheel There Will Not Be Enough Thread Contact And The Engine Could Fall Off The Lift. If The Long Screws Are Used On 40 To 90 Hp They Will Damage The Stator Under The Flywheel (Then The Engine Won'T Start). Will Not Work On The 60 V4/V6 That Lifts From The Crankshaft. The Flywheel On These Models Is Not Designed To Accept Lift Ring P/N Amt0046 Johnson Evinrude Omc Factory Part Number: 396748 Requires: Mt0022 - Lifting Eye - Works On Non-Verado Mercury (1.5""X16)
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
