• Home
  • Outdoors
  • Mensi Low Pressure Lpg Propane Gas Fireplace...
Ami Venture US

Mensi Low Pressure Lpg Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit

$26.46     $31.75   17% Off     (Free Shipping)
1 available
  • Brand: Mensi
  • Category: Outdoors
  • Code: PATLGB07CN33GSJ
  • Weight: 0.01 pounds
  • Shipping Weight: 0.4 
  • Dimensions:  0.01  x 0.01  x 0.01  inches
  • Color:  Gas Valve Thermocoup
  • Color:  Gas Valve Thermocoup
  • Item ID: 3708725
  • List Price: $31.75
  • Seller: Ami Venture US
  • Availability: 1
  • Ships from: United States
  • Ships in: 9 business days
  • Transit time: Up to 4 business days
  • Delivery by: Sep 29 to Oct 01
  • Low Working Pressure Max 12 Psi(65Mbar), Ce&Csa Tested Main Control Valve In & Out With 38 Male Flare Thread,Certification No: 70108069 Length Of Thermocoupler 600Mm Head Tip M8*1 (This Is Low Pressure Control Valve Max Rating Btu 50000) Platic Black Bakelite Knob Diameter 38Mm And D Insert For Valve 60-61Mm Suitable For Low Pressure Repair Control System For Grill, Fire Pit, Fireplace & Heater (Max Btu Rating: 50000 Working Pressure 65Mbar) Keep The Thermocoupler To Be Heated And Push The Valve Around 5-10S Then Release Hand (If Flame Stops, Ajust The Location Of Thermocouple Tip)

The Valve Is A Low Pressure Valve With 38 Male Flare Thread On Entrance & Exit Operation Instructions 1) Fix The Valve On A Plate Or Board Of Your Grill Or Fire Pit By The Head Screw And Flange 2) Connect Your Inlet And Outlet Hose On Inlet And Outlet Side (Faston It Tightly Enough In Case Of Gas Leakage) 3) Faston The Thermocouple Nut M8 On The Valve End Tightly (Check If Your Valve End Thread If 8Mm Before You Buy) 4) Connect Thermocouple And End Thread Well 5) Open Gas By Correct Size Knob And Push Your Valve Around 5-10S Till The Thermocouple Head Is Heated Enough 6) Release Your Hand And It Work Properly If When You Release Hand, Gas Valve Shut Off Again, Please Check A If Your Thermocouple Is Always Be Heated On Flame B If The Thermocouple End Is Well Connect With Valve C If The Inlet And Outlet Side Well Connect With Hose You Have Possible Problems Occurs During Your Use: 1) Valve After Turn Can Not Stick During Using Reason: A The Thermocouple Head Is Not Heated In Right Place, Please Adjust Thermocouple Tip Position B The Connection Between Thermocouple End And Valve Is Not Connected Tight Enough Or Too Tight, Please Adjust The Screw Again C Need To Push Valve First Then Turn The Spindle And Hold For Few Seconds, It Cannot Stick Immediately May Need 10-30Seconds

Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.


For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.


Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Add Review

Recommendations