Softride Springs Use Only American Steel And The Individual Leafs Of Each Spring Are Shot-Peened With Hard Steel Pellets At Very High Velocities. This Shot-Peening Compresses The Surface Of The Steel Thereby Increasing The Tensile Strength Of The Spring. Without This Shot-Peening Procedure, The Maximum Wheel Travel And Ride Quality Could Not Be Achieved Without Sacrificing The Life Of The Spring. Softride Springs Use Bolt Style Spring Clips, Eliminating Friction. Other Spring Designs Use The Cinch Style Bend Clips Which Bend Tightly Over The Spring Leafs Causing Binding And Friction. Skyjacker Softride Springs Taper Over The Entire Length Of The Leaf Creating More Flex At The Leaf Ends. This Tapering Distributes Loads More Evenly Over A Greater Area And Reduces The Tendency For One Leaf To Dig Into The Leaf Above It.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
