Ami Venture US

Tupavco Ethernet Extender Kit (Pair) Lan Network Cable Range Extension (Up To 7000Ft) Tex-100

$310.91     $373.10   17% Off     (Free Shipping)
1 available
  • Seller: Ami Venture US
  • Availability: 1
  • Ships from: United States
  • Ships in: 9 business days
  • Transit time: Up to 4 business days
  • Delivery by: Oct 17 to Oct 19
  • Ethernet Extender Kit Improves The Network Cable Range Limit Of 328Ft (100M) Up To 7000Ft | Lan Extender Can Use Cat5/Cat6 Or Phone Cable To Pass The Signal To The Remote Location (Rj45/Rj11) | Ethernet Range Extender Is Easy To Set Up No Driver Or Software Installation Needed | Kit Comes In Pair With Preset For Central And Remote Location And It'S Ready For Use Out Of The Box | Provides Stable Cable Connection To Remote Devices Like Computer Camera Voip Phone Modem Router | Vdsl Extender Boosts The Range Of A Broadband Signal Using Only 2 Copper Wires In Phone Or Lan Cable | Led Indicators For Monitoring Speed And Activity; Dip Switches To Choose 30A/17A Profile Snr Margin | Cost-Effective Solution To Connect Devices In Separate Buildings By Existing Cable Infrastructure

Ethernet Extender Kit Tex-100 Extends The Ethernet Cable (Cat5 Cat6 Cat7 Rj45) Range Well Beyond 328 Feet (100M) Limit To Up To 7000 Ft (2 Km) Over 2-Wire Twisted Pair. The Ethernet Booster Uses Vdsl2 Technology To Extend Network Service Through A Single-Pair Phone Line Copper Wire Or An Existing Rj-45 Cable. This Network Extender Kit Can Use An Existing Network Or Phone Line Setup To Deliver Long Reach Ethernet Cable Signal Where The Wireless Signal Transmission Is Not Possible Or In Situations Where A Wired Signal Is Limited By The Rj45 Cable Length. These Point To Point Network Boosters Are Perfect For Commercial Buildings Residential Units Hospitality Environments Remote Office Spaces Or Private-Network Backbone To A Corporate Lan. Network Extender Can Be Used To Connect Separate Buildings On Remote Locations Where Cable Connection (Rj-45 Or Telephone Line) Is Available Or Already Exist Or Connect Remote Devices (I.E. Pc Computer Digital Sensors In The Field Ap Voip Phone Wifi Aps Ip Camera Intercom Modem Router) To The Main Ethernet/Internet Source. Ethernet Extender Tex-100 Kit Comes In A Pair A Sender And Receiver And Is Plug-And-Play Ready And Easy To Set Up With No Configuration Driver Or Software Needed. To Establish A Point-To-Point Connection Devices Are Factory Preset In Co And Cpe (Rt) Modes As The Sender And Receiver. Four Dip Switch User-Selectable Settings Provide The Flexibility Required To Achieve The Optimal Speed-Distance Combination And Can Optimize Performance Based On The Quality Of The Line Speed The Distance To Reach Different Applications Scenarios And Network Topology. Use Dip Switches To Setup And Control Co Or Cpe Mode 30A Or 17A Profile Symmetric Or Asymmetric Band Plan And 6Db Or 9Db Snr Margin. Two Sets Of Three Led Indicators Are Built-In For Easy Diagnosing And Monitoring The Status Of Power Co/Cpe Mode Link Activity Data Rate And Duplex Mode.

Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.


For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.


Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Add Review

Recommendations