Instruction For Use: 1. Clean: Clean Up The Surface Thoroughly, Making Sure That There Is No Dust . Wait The Surface Dry Completely Before The Installation (Please Be Two People Working Together, The Width Of The Update, A Person Is Difficult To Complete) 2.Measure & Cut: Cut The Film To The Desired Size Through The Grid Lines. It Is Suggested To Leave 2-3Cm Margins At Each Side For Later Adjustment 3.Apply: One From The Side, Peel Off The Backing, And Applying The Film To The Surface Inch By Inch (Do Not Remove The Entire Backing At Once) 4.Flatten: While Applying The Film, Use A Cloth, A Squeegee Or A Card To Remove The Air Bubbles Or Bump Areas 5.Enjoy: Trim Off The Margins, Enjoy Your New Gorgeous Top Surface Notes: - Make Sure That The Surface Is Clean And Flat . - Heavily Textured Surfaces May Affect The Adhesive Glue Effect. - Using A Smooth Surface Is Therefore Strongly Recommended! - Be Careful When Working With The Utility Knife In Order To Avoid - Color Tones Can Vary Due To Lighting In The Room, Pictures On Wall For Reference Only
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
