Vibra-Tite 732 Gasket Maker Is A Smooth, Thick Purple Paste. The Anaerobic Chemistry Of This Product Creates A Tough Flexible Formed-In-Place Gasket. Once Confined Between 2 Components, 732 Gasket Maker Provides An Instant Low Pressure Seal. Gasket Maker Is Used For Fuel And Water Pumps, Split Crank Cases On Engines, Gearbox Covers, Engine Thermostats, Air Compressor End Caps, Chainsaws, Lawn Mowers Etc. This Product Can Be Used With Or Without Pre-Cut, Pre-Formed Gaskets. Ensure Parts Are Clean, Dry And Free From Oil And Grease Before Use. Product Is Normally Hand Applied From The Tube. Fixture Speed With Activator Is <15 Minutes. Fixture Speed Without Activator Is 1 Hour. Shelf Life Is 12 Months At 68 Degree F. 24 Hours At 68 Degree F Full Cure Time. 500-2000 Psi Shear Strength. Product Should Be Stored In A Cool And Dry Location At Temperatures Between -10 Degree C To 30 Degree C. Optimal Storage Is 22 +/- 4 Degree C. Shelf Life Is 18 Months From Date Of Manufacture When Stored At 22 +/- 4 Degree C. General Purpose Flexible Gasket Maker For Rigid Machined Flanges. Unprimed 0.010 Inches; Primed 0.020 Inches Maximum Gap Fill. 1.1 Specific Gravity. Unprimed 4-24 Hours; Primed 30 Minutes - 4 Hours Cure Speed. N Suggested Primer. 50 Ml Tube.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
