5 lb., 3/32"", 7018 welding Rod. E7018 mild steel ""low hydrogen"" Welding electrodes easily produces quality results on smaller Amperage DC or higher amperage AC welders. It is suitable for all positions on hard enable steels where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when Welded and conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, Trailer hitches and chassis. Recommended Polarity: DCEP (reverse)or AC. Diameter (inches): 3/32"" Weight lbs.: 5 tensile strength (PSI): 84, 000 amperage: 65-100 made in the USA. E7018 mild steel ""low hydrogen"" Welding Rod 5# Package Made in the USA
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
