This T-Slot Router Bit Cuts Slots For Standard 1/4"" Bolts That Have A 1/2"" Wide X 3/16"" High Heads With Up To 1/4"" Shaft Diameter. The Shank Is 1/4"" In Diameter.Highlights:- Create T Slots For Custom Jigs And Hold-Downs Or For Picture Frame Keyhole Hanging- Premium C3 Micro-Grain Tungsten Carbide Blades For A Sharper & Longer Lasting Edge- For Use On Table Mount And Handheld Router- Silver Induction Brazing For Maximum Strength And Durability- Manufactured With Anti-Kickback Design To Help Prevent Workshop Mishapsitem Includes:1 Router Bitt-Slot Router Bits Are Great For Creating T-Channels For Jig And Clamp Applications And Keyholes For Hanging Projects. It Is Recommended That A Straight Groove Matching Width To The Upper Part Of The ""T"" Be Cut Into The Workpiece Prior To Routing The T-Slot To Reduce The Stress On The Bit. T-Slot Cuts Produce A Lot Of Wood Chips With Little Room For Them To Escape And Can Cause The Bit To Get Bogged Down. Go Easy On The Feed And Back Off Every Couple Of Inches Before Resuming With The Cut.
Actual product packaging and materials may contain more and/or different information than that shown on our website. We recommend that you do not solely rely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.
For additional information about a product, please contact the manufacturer. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. ZiFiti does not assume liability for inaccuracies or misstatements about products.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
